PRESS RELEASE: VdS approval for rugged metal enclosure fire system horn sounders
- D1x explosion proof sounder and beacon achieve EN54 CPR, MED and DNV approval
- New intrinsically safe versions of GNExCP7 and STExCP8 call points
- Class I Zone 1 and Div 2 approval for STExCP8 call point range
- New D2x range Div 2 and Zone 2 alarm horns and speakers
- New loudspeaker versions plus approval upgrade
- STEx range extension of DNV type approval
- Next generation SIL rated warning signals
- New & Upgraded Alarm Horn Sounders - D1xS
- New & Upgraded Xenon & LED Beacons - GNExB2 & STExB2
- New & Upgraded Alarm Horn Sounders - GNExS & STExS
- AlertAlarm, AlertAlight & Sonora product series upgrade
- M series upgrade - new alarm horn sounder electronics in IP66/67 Type 4/4X/13 enclosures
- E2S upgrades its signaling beacons with super bright outputs and additional configuration options
- The world’s most extensive range of MCPs has been improved – again
- E2S launches the brightest ever hazardous location UL1971 LED fire alarm beacon
- E2S major on hazardous area integrated warning device assemblies at ADIPEC
- D1xB2 explosion proof SIL2 signals at NFPA 2019
- STEx 316 stainless steel signals - DNV approved
- New D1xB2 beacons launched at OTC 2019
- STExCP8 call points - now SIL2 compliant
- E2S exhibits at ADIPEC 2018
- D2x LED & Xenon beacons - next gen UL1971 signals
- Global GRP - the GNEx solution
- The brightest lights at NFPA 2018
- OTC 2018 is all about the LED
E2S
Warning Signals has gained VdS approval and CPR compliance to directive
305/2011/EU for its AlertAlarm D112 alarm horn sounder by testing to EN54-3.
It combines the field-proven electronics of its AlertAlarm A Series with a
robust, corrosion resistant marine grade LM6 aluminium alloy enclosure, giving
greater mechanical and UV protection.
The D112 has a maximum SPL of 119 dB(A) @ 1m at the nominal 24VDC fire
alarm system operating voltage; the CPR compliance is valid for operation from
18 – 30VDC. The 48VDC version is also compliant. The VdS approval covers the
five most commonly used fire alarm warning tones and also confirms that the
units operate to specification under conditions of dry and damp heat, cold,
shock and vibration. The aluminium enclosure complies with Type B environmental
category making it suitable for outdoor installation, and so supporting the
extension of a fire detection system into areas beyond the relatively benign
office environment, improving safety. Other tests include EMC, SO2
corrosion resistance and dust and water ingress.
UL approved versions for general signalling use are also available. For
this version, the aluminium enclosure is sealed to IP66, NEMA Type 4, 4X and
3R.
For use in a wide range of signalling applications, the AlertAlarm D112
offers a choice of 45 different alarm tones, and with the option of activating
a second and third tone via additional control cables, it is a cost effective,
sophisticated signalling solution providing the versatility of multiple tones
from a single unit. It is also available as part of the DL112X, in which the
horn sounder is integrated with a 5 Joule Xenon strobe, or as the DL112H
combination unit, where the horn sounder is combined with a high output 24-unit
LED array beacon.
Download the full press release in different languages: