Trusted and approved by:
E2S is the world’s leading independent manufacturer of high performance audible and visual signals, manual call points and push buttons for life safety applications in commercial, industrial, marine, onshore and offshore ordinary and hazardous locations.
Combining the latest technology with over 25 years of engineering expertise we have created the most extensive range of life saving signals and controls that satisfy the toughest global standards.
The D1xB2X15 is a globally approved explosion proof 15 Joule Xenon beacon. The robust IP66, Type 4/4X corrosion proof LM6 marine grade aluminium alloy enclosure ensures suitability for all Class I/II Div 1, Zone 1, 2, 21 & 22 applications.
The GNExCP7-PT tool reset push button Ex d explosion proof manual call points feature a robust GRP (glass reinforced polyester) enclosure with a 316 stainless steel mechanism and IP66/67 rating – made for the harshest of hazardous environments.
The D1xB2XH2 is the brightest explosion proof Xenon Strobe light/beacon available for public mode fire alarm applications. UL/cUL/ULC approved for Class I/II Div 1, Class I Zone 1/Zone 21 for gas and dust environments.
The latest addition to the E2S Warning Signals D1x family are the D1xB2 beacons, which offer global approvals with SIL1 and SIL2 compliance. Light sources are available as either Xenon or LED. Strobes are offered in 5, 10, 15 or 21 Joule Xenon variants with four flash rate options and are approved for private mode fire alarm use to UL1638. The high-power LED array features a steady mode for status applications, five flash patterns and three remotely selectable alarm stages/channels. UL/cUL and ULC approved for use in Class I/II Division 1, Zone 1 and Zone 21 explosion proof environments and IECEx and ATEX certified for Zone 1 and 21 applications – a truly global solution.
The 316L stainless STEx family from E2S – corrosion proof and DNV approved. The explosion/flameproof STEx family from E2S Warning Signals encompasses audible, visual and combined warning devices and manual call points, all employing 316L stainless steel enclosures. Designed for installation in the harshest of onshore and offshore environments where corrosion is a particular problem, the units are IECEx and ATEX approved for Zones 1 and 21 for use in hazardous areas containing both gas or dust. Extended certification and operational temperature ranges enable the STEx family to be employed in the most arduous of applications. Members of the STEx family are also DNV approved for on-deck marine use.
New SIL 2 compliant 316L stainless steel call points for onshore and offshore applications, E2S Warning Signals has announced that its STExCP8 manual call points are SIL2 compliant to IEC 61508, allowing system integrators greater confidence when designing systems requiring an enhanced safety integrity level. The robust devices are part of the comprehensive STEx family of explosion/flameproof audible and visual signalling devices and feature highest grade 316L stainless steel enclosures. Designed for installation in the harshest of onshore and offshore environments, the call points and push buttons are IECEx and ATEX approved for use in Zone 1 and 2 hazardous areas for fire and gas alarm systems and emergency shutdown and process control applications.