Solving the combination problem for private fire signaling
- New & Upgraded Xenon & LED Beacons - GNExB2 & STExB2
- New & Upgraded Alarm Horn Sounders - GNExS & STExS
- AlertAlarm, AlertAlight & Sonora product series upgrade
- M series upgrade - new alarm horn sounder electronics in IP66/67 Type 4/4X/13 enclosures
- E2S upgrades its signaling beacons with super bright outputs and additional configuration options
- The world’s most extensive range of MCPs has been improved – again
- E2S launches the brightest ever hazardous location UL1971 LED fire alarm beacon
- E2S major on hazardous area integrated warning device assemblies at ADIPEC
- D1xB2 explosion proof SIL2 signals at NFPA 2019
- STEx 316 stainless steel signals - DNV approved
- New D1xB2 beacons launched at OTC 2019
- STExCP8 call points - now SIL2 compliant
- E2S exhibits at ADIPEC 2018
- D2x LED & Xenon beacons - next gen UL1971 signals
- Global GRP - the GNEx solution
- The brightest lights at NFPA 2018
- OTC 2018 is all about the LED
- Auto-synchronizing UL1971 LED beacon for Haz Loc
- Solving the combination problem for private fire signaling
- MED approved products showcased at MARINTEC 2017
- Innovative E2S LED technology at ADIPEC
- Additional MED approvals
- E2x family upgrade
- GNExB2LD2 at Offshore Europe 2017
- New LED beacon at O&G Asia 2017
Unique UL Class I/II Div 2 LED beacon for private fire systems and general signalling
E2S Warning Signals is the world’s largest independent manufacturer of audible and visual warning signals for use in fire detection systems installed in commercial, industrial and hazardous areas. The new D2xB1LD2 beacon is UL1638 approved for private mode fire applications and general signalling duties. It is available in a choice of red or grey enclosure colours with field replaceable UV stable polycarbonate lens colour filters, field-replaceable without needing to access the enclosure and fitted with a stainless-steel guard as standard. Candela ratings of 73.4cd to UL1638 for private mode fire and 180cd for general signalling applications ensure that the D2xB1LD2 is the most effective LED signalling solution available for hazardous locations. An array of high power Cree® LEDs provides minimal inrush and operating current and optimises visibility in all directions. The beacon has five flashing modes: 1Hz, 1.3Hz, 2Hz, double strike and triple strike with an effective output of up to 180cd for warning applications. It also has selectable high power and low power steady modes with outputs up to 87cd for status signalling. DC voltage versions feature three remotely selectable stages, enabling different flash rates to be allocated to different processes or alarm conditions from one device.
With UL/cUL approval for Class I Div 2, Class II Div 2 and Class I Zone 2/22 as well as being IECEx and ATEX certified for Zone 2 and 22 applications, the D2x family of warning signals can be installed almost anywhere in the world. The marine grade LM6 aluminium enclosure has a chromate and powder coated finish for maximum corrosion protection and conforms to NEMA Type 4/4X/3R/13 and EN60529 IP66 protection standards. Pluggable duplicate (four wire) terminations mean quick installation and enable multiple units to be looped or daisy-chained without requiring additional junction boxes. Integrated monitoring diodes and user-configurable end of line options ensure compatibility with supervised control panels.
The D2xCDLD2 combination device features the D2xB1LD2 with a D2xS1 116dB(A), 64 tone UL464 alarm horn integrated into a single enclosure to create the most effective solution for audible and visual signalling, reducing cabling and installation costs.
