Now featuring dual cable entries
Supplied with stopping plugs
The E2S Hootronic series of products faithfully reproduce the sounds made by legacy electro-mechanical signalling devices but in a modern, reliable and cost effective way.
With output levels of up to 121dB(A) at 1 metre the HAL121 surpasses legacy electro-mechanical devices in performance and effectiveness, it is also continuously rated, requires zero maintenance and the signal quality will not degrade with age.
Datasheet | Datasheet.pdf |
Installation Manual | ISN5201-C__HA121_HAL121X_HAL121H_.pdf |
Russian EAC Declaration of Conformity | D-GB.GA05.B.12595-20-24.03.2025.pdf |
Russian Maritime register | 19.00193.278.pdf |
Declaration of Conformity | DC-034_Issue_F_Hootronic.pdf |
2D drawing (PDF) | SK0262_Issue_A.pdf |
2D drawing (DWG) | SK0262_Issue_A.dwg |
3D drawing (IGS) | SK0262-3D_Issue_A.IGS |
3D drawing (STEP) | SK0262-3D-3D_Issue_A.STEP |
Hi-res product image 1 (TIFF) | 2-33-020_HAL121H-G.tif |
The products in the Hootronic range have 5 user
selectable ‘traditional’ sounds including:
Each of these sounds have two additional, remotely
selectable, alarm stages.
Remote switch generates genuine ‘tail off’ to sound when alarm is terminated.
Hootronic Sounder: | |
---|---|
Nominal output: | 121dB(A) @ 1m +/- 3dB – Tone 2 [112dB(A) @ 10ft/3m] |
No. of tones: | 5 |
No. of stages: | 3 |
Volume control: | Max. 121dB(A); Min. 112dB(A) approx. |
Effective range: | 300m/984ft @ 1KHz |
Beacon: | |
Light source: | High intensity L.E.D. array. 24 x Superflux type high ouput L.E.D’s |
Options: | Steady or 2Hz flash mode (on board selection) |
Peak/Effective Intensity cd: | Green L.E.D: 176cd – measured ref. to I.E.S. |
Terminals: | 0.5 to 4.0mm² cables |
L.E.D. colours: | Amber Blue, Green, Red and White |
Lens colour: | All L.E.D. colours use a Clear lens to maximise output and to ensure the signal is most effective in high ambient light |
General: | |
Voltages DC: | 24V dc |
Voltages AC: | 115V ac; 230V ac |
Ingress protection: | IP56 |
Housing material: | High impact UL94 V0 & 5VA FR ABS |
Colour: | Red (RAL3000) & grey (RAL7038) |
Cable entries: | 2 x M20 clearance gland knockouts in side & back |
Terminals: | 0.5 to 4.0mm² cables. |
Operating temp: | -25 to +55°C [-13° to +131°F] |
Storage temp: | -40 to +70°C [-40° to +158°F] |
Relative humidity: | 90% at 20°C [68°F] |
Weight: | DC: 2.30kg/5.06Ibs AC:2.90kg/6.38Ibs |
*Candela measurements representative of performance with clear lens at optimum voltage. *SPL data +/-3dB(A). Measured at optimum voltage. |
Product Version: | Nominal Voltage: | Voltage Range: | Beacon Current: | Horn Current: |
---|---|---|---|---|
DC024 | 24Vdc | 18-30Vdc | 87mA | 375mA |
AC115 | 115Vac 50/60Hz | 103.5-126.5Vac | 34mA | 160mA |
AC230 | 230Vac 50/60Hz | 207-253Vac | 19mA | 75mA |
Version | Part code: |
---|---|
24V dc | HAL121HDC024[x]/[y] |
115V ac | HAL121HAC115[x]/[y] |
230V ac | HAL121HAC230[x]/[y] |
[x] = Housing colour: | R: Red, G: Grey |
[y] = Lens colour: | A: Amber, B: Blue. W: White, G: Green, R: Red |
Stage 1 | WAV file | Frequency Description. | Stg 2 | Stg 3 |
---|---|---|---|---|
T 1 | /system/1/assets/files/000/000/411/411/491442314/original/TF046.WAV | Industrial Claxon | T 3 | T 5 |
T 2 | /system/1/assets/files/000/000/414/414/146644246/original/TF047.WAV | High Frequency Mechanical Siren | T 1 | T 5 |
T 3 | /system/1/assets/files/000/000/416/416/0c52c2259/original/TF048.WAV | Medium Frequency Mechanical Siren | T 1 | T 5 |
T 4 | /system/1/assets/files/000/000/413/413/c47bf00c7/original/TF049.WAV | Electro Mechanical Buzzer | T 2 | T 5 |
T 5 | /system/1/assets/files/000/000/423/423/854c33e83/original/TF050.WAV | Mechanical Bell | T 1 | T 2 |
Country specific or custom tone configurations and alarm frequencies are available upon request. |