Now featuring dual cable entries
Supplied with stopping plugs
The E2S Hootronic series of products faithfully reproduce the sounds made by legacy electro-mechanical signalling devices but in a modern, reliable and cost effective way.
With output levels of up to 121dB(A) at 1 metre the HAL121X surpasses legacy electro-mechanical devices in performance and effectiveness, it is also continuously rated, requires zero maintenance and the signal quality will not degrade with age.
| Datasheet | Datasheet.pdf |
| Installation Manual | ISN5201-C__HA121_HAL121X_HAL121H_.pdf |
| Russian EAC Declaration of Conformity | D-GB.GA05.B.12595-20-24.03.2025.pdf |
| Russian Maritime register | 19.00193.278.pdf |
| Declaration of Conformity | DC-034_Issue_F_Hootronic.pdf |
| 2D drawing (PDF) | SK0129_Issue_C.pdf |
| 2D drawing (PDF) | SK0262_Issue_A.pdf |
| 2D drawing (DWG) | SK0129_Issue_C.dwg |
| 2D drawing (DWG) | SK0262_Issue_A.dwg |
| 3D drawing (IGS) | SK0129-3D_Issue_A.IGS |
| 3D drawing (IGS) | SK0262-3D_Issue_A.IGS |
| 3D drawing (STEP) | SK0129-3D_Issue_A.STEP |
| 3D drawing (STEP) | SK0262-3D-3D_Issue_A.STEP |
| Hi-res product image 1 (TIFF) | 2-33-010_HAL121X-G-R.tif |
| Hi-res product image 2 (TIFF) | 2-33-010_HAL121X-G-C-F.tif |
The products in the Hootronic range have 5 user
selectable ‘traditional’ sounds including:
Each of these sounds have two additional, remotely
selectable, alarm stages.
Remote switch generates genuine ‘tail off’ to sound when alarm is terminated.
| Hootronic Sounder: | |
|---|---|
| Nominal output: | 121dB(A) @ 1m +/- 3dB – Tone 2 [112dB(A) @ 10ft/3m] |
| No. of tones: | 5 |
| No. of stages: | 3 |
| Volume control: | Max. 121dB(A); Min. 112dB(A) approx. |
| Effective range: | 300m/984ft @ 1KHz |
| Beacon: | |
| Energy: | 5 Joules (5Ws) |
| Flash rate: | 1Hz (60 fpm) |
| Peak Candela: | 500,000 cd – calculated from energy (J) |
| Effective Intensity cd: | 250 cd – calculated from energy (J) |
| Peak Candela: | 86,935 cd* – measured ref. to I.E.S. |
| Effective Intensity cd: | 200 cd* – measured ref. to I.E.S. |
| Lens colours: | Amber, Blue, Clear, Green, Magenta, Red & Yellow |
| Tube life: | Emissions are reduced to 70% after 5 million flashes |
| General: | |
| Voltages DC: | 24V dc |
| Voltages AC: | 115V ac; 230V ac |
| Ingress protection: | IP56 |
| Housing material: | High impact UL94 V0 & 5VA FR ABS |
| Colour: | Red (RAL3000) & grey (RAL7038) |
| Cable entries: | 2 x M20 clearance gland knockouts in side & back |
| Terminals: | 0.5 to 4.0mm² cables. |
| Operating temp: | -25 to +55°C [-13° to +131°F] |
| Storage temp: | -40 to +70°C [-40° to +158°F] |
| Relative humidity: | 90% at 20°C [68°F] |
| Weight: | DC: 2.30kg/5.06Ibs AC:2.90kg/6.38Ibs |
| *Candela measurements representative of performance with clear lens at optimum voltage. *SPL data +/-3dB(A). Measured at optimum voltage. |
|
| Product Version: | Nominal Voltage: | Voltage Range: | Beacon Current: | Horn Current: |
|---|---|---|---|---|
| DC024 | 24Vdc | 18-30Vdc | 250mA | 375mA |
| AC115 | 115Vac 50/60Hz | 103.5-126.5Vac | 70mA | 160mA |
| AC230 | 230Vac 50/60Hz | 207-253Vac | 35mA | 75mA |
| Version | Part code: |
|---|---|
| 12V dc | HAL121XDC012[x]/[y] |
| 24V dc | HAL121XDC024[x]/[y] |
| 115V ac | HAL121XAC115[x]/[y] |
| 230V ac | HAL121XAC230[x]/[y] |
| [x] = Housing colour: | R: Red, G: Grey |
| [y] = Lens colour: | A: Amber, B: Blue. C: Clear, M: Magenta, G: Green, R: Red, Y: Yellow |
| Note: Suffix part code with -F for forward facing Xenon beacon orientation. | |
| Stage 1 | WAV file | Frequency Description. | Stg 2 | Stg 3 |
|---|---|---|---|---|
| T 1 | /system/1/assets/files/000/000/411/411/491442314/original/TF046.WAV | Industrial Claxon | T 3 | T 5 |
| T 2 | /system/1/assets/files/000/000/414/414/146644246/original/TF047.WAV | High Frequency Mechanical Siren | T 1 | T 5 |
| T 3 | /system/1/assets/files/000/000/416/416/0c52c2259/original/TF048.WAV | Medium Frequency Mechanical Siren | T 1 | T 5 |
| T 4 | /system/1/assets/files/000/000/413/413/c47bf00c7/original/TF049.WAV | Electro Mechanical Buzzer | T 2 | T 5 |
| T 5 | /system/1/assets/files/000/000/423/423/854c33e83/original/TF050.WAV | Mechanical Bell | T 1 | T 2 |
| Country specific or custom tone configurations and alarm frequencies are available upon request. | ||||
.png)
