Datasheet | Datasheet.pdf |
Installation Manual | D199-00-401-IS_Issue_3_STExB2LD2_.pdf |
INMETRO Installation Manual | D199-00-401-IS-IEx_Issue_A.pdf |
ATEX certificate | DEMKO_16_ATEX_1466X_Issue_1_STEx.pdf |
IECEx certificate | IECEx_ULD_16.0017X_Issue_1_STEx.pdf |
INMETRO certificate | CoC_IEx_20.0156X_Rev_0_STEx.pdf |
Russian Ex certificate | __RU_C_GB.71.B.00109.pdf |
DNV Type Approval | TAA00001JN_1.pdf |
Declaration of Conformity | DC-070_Issue_F_STEx.pdf |
SIL1 Certificate | T900-123-1_Beacons_SIL1.pdf |
2D drawing (PDF) | SK0392_Issue_A.pdf |
2D drawing (DWG) | SK0392_Issue_A.DWG |
3D drawing (IGS) | SK0392-3D_Issue_A.IGS |
3D drawing (STEP) | SK0392-3D_Issue_A.STEP |
Wiring Schematic | D199-06-401_Issue_B__STExB2LD2_.pdf |
Pipe Mount Drawing (PDF) | D217-05-281_Issue_B_STExB2.pdf |
Source: | Array of 4 x High Power Cree® LED’s |
Modes: | 1Hz flash (60 fpm) 1.5Hz flash (90 fpm) 2Hz flash (120 fpm) Double strike flash Triple strike flash High Power Steady Low Power Steady |
Eff. Intensity cd: | 174 cd – High Power Steady |
Eff. Intensity cd: | 338 cd – 1Hz flash |
Lens colours: | Amber, Blue, Clear, Green, Magenta, Red & Yellow |
Voltages DC: | 24vdc |
Voltages AC: | 115vac; 230vac |
Ingress protection: | IP66 |
Enclosure matl: | 316L Stainless Steel |
Enclosure finish: | Chromated & powder coated |
Colour: | RAL3000 Red |
Cable entries: | 4 x M20 ISO (3 stopping plugs inc.) Adaptors to M25, 1/2" & 3/4" NPT can be specified |
Terminals: | 0.5 – 2.5mm² (20-14 AWG) |
Enclosure volume: | <2 litres |
Line monitoring: | Blocking diode included EOL Min. 500 Ohm 2w, or 3k3 Ohm 0.5w resistor or diode (DC versions) can be fitted |
LED life: | 60,000 hours |
Temperature range: | -50° to +70°C (-58°F to +158°F) |
Relative humidity: | 95% – Additional tropicalisation is recommended for applications where both high relative humidity and high ambient temperatures exist |
*All candela data is representative of performance with clear lens at optimum voltage. | |
Accessories: | SP65-0001-A2 Pole Mount Bracket Kit 2" St/St A2 SP65-0001-A4 Pole Mount Bracket Kit 2" St/St A4 SP65-0003-A2 Sunshade – St/St A2 (304) SP65-0003-A4 Sunshade – St/St A4 (316) |
Version: | In Rush: | Voltage: | Steady High Power: | Steady Low Power: | Flashing 1Hz: |
---|---|---|---|---|---|
24V dc | 1.89A 0.22ms | 18-54V dc | 240mA | 134mA | 110mA |
115V ac | 1.15A 12ms | 103.5-126.5V ac 50/60Hz | 95mA | 78mA | 90mA |
230V ac | 0.67A 12ms | 207-253V ac 50/60Hz | 48mA | 37mA | 45mA |
Version: | Part code: | |
---|---|---|
Product type: | STExB2 | |
Type: | LD2 | LED Multifunction Beacon |
Voltage: | DC024 AC115 AC230 |
18-54V dc 103.5-126.5V ac 207-253V ac |
Cable Entry Type:[e] | A B C D E F G H I J |
4 x M20x1.5mm 2 × 1/2" NPT – adaptors 2 × 3/4" NPT – adaptors 2 x M25x1.5mm – adaptors 1 × 1/2" NPT – adaptor 1 × 3/4" NPT – adaptor 1 x M25x1.5mm – adaptor 3 × 1/2" NPT – adaptors 3 × 3/4" NPT – adaptors 3 x M25x1.5mm – adaptors |
Adaptor/Stopping plug material: [m] |
B N S |
Brass Nickel Plated Stainless Steel (standard) |
Guard material & tag: [s] | 1 2 3 4 |
A2 304 Stainless Steel A4 316 Stainless Steel (default) A2 304 St/St with Equip. Tag A4 316 St/St with Equip. Tag |
Product version: [v] | A1 M1 |
IECEx & ATEX Group II 2G/D Zone 1, 2, 21 & 22 IECEx & ATEX Group II 2G/D Zone 1, 2, 21 & 22 & DNV Type Approval |
Enclosure colour: [x] | R S |
Red Special (contact E2S) |
Lens colour: [y] | A, B, C, G M, R, Y |
Amber, Blue, Clear, Green Magenta, Red, Yellow |
Stage 1: [On board] |
Stage 2: [Remote] |
Stage 3: [Remote] |
---|---|---|
Steady High Power | Flashing 1Hz | Triple Strike |
Steady Low Power | Flashing 1Hz | Triple Strike |
Flashing 1Hz | 2x Flash 2Hz | Triple Strike |
Flashing 1.5Hz | Flashing 2Hz | Double Strike |
Flashing 2Hz | Triple Strike | Triple Strike |
Double Strike | Steady High Power | Triple Strike |
Triple Strike | Flashing 2Hz | Double Strike |
Note: Remote second and third stage on DC units only |