| Datasheet | Datasheet.pdf |
| Installation Manual | D211-01-401-IS_Issue_2__D2xB1LD2_.pdf |
| IECEx certificate | IECEx_ULD_14.0004X_005_D2x.pdf |
| ATEX certificate | DEMKO_14_ATEX_4786493904X_Rev5_D2x.pdf |
| UL certificate of compliance | UL_CoC_-_20171013-E245313_Vol.1_Sec.2_D2xB.pdf |
| CSFM Listing | CSFM_Listing_2279-0500_D2xB1.PDF |
| UKCA Certificate | UL21UKEX2131X_Rev._0_D2x.pdf |
| Declaration of Conformity | DC-061_Issue_J_D2x.pdf |
| Declaration of Conformity UKCA | DC-102_Issue_A_D2x_UKCA.pdf |
| 2D drawing (PDF) | D211-05-251_Issue_1.pdf |
| 2D drawing (DWG) | D211-05-251_Issue_1.DWG |
| 3D drawing (STEP) | D211-05-251-3D_Issue_A.STEP |
| Wiring Schematic | D211-06-401_Issue_2.pdf |
| Nameplate Drawing | D211-09-401_Issue_1.pdf |
| Hi-res product image 1 (TIFF) | 1-31-060_D2xB1LD2-H-RC.tif |
| Pipe Mount Drawing (PDF) | D217-05-241_Issue_B_D2xB1.pdf |
| Source: | Array of 4 x High Power Cree® LED’s |
| Modes: | 1Hz flash (60 fpm) 1.5Hz flash (90 fpm) 2Hz flash (120 fpm |
| Eff. Intensity cd: | 38.38 cd UL1971 Public mode fire |
| Eff. Intensity cd: | 180 cd UL1638 General signaling |
| Peak Intensity cd: | 300,000 cd |
| LED life: | >60,000 hours |
| Synchronisation: | Flash rates synchronise for a minimum of 2 hours per UL1971 |
| Voltage: | 24V dc (16-33V dc) |
| In-rush: | 1.88A for 2ms |
| Ingress protection: | IP rating per EN60529:IP66 Type rating per UL50E/NEMA250:4/4X/3R/13 |
| Enclosure material: | Marine grade LM6 aluminum alloy |
| Enclosure colour: | Red |
| Lens material: | Borosilicate glass |
| Cable entries: | 2 x M20x1.5, 2 × 1/2"NPT, 1 × 3/4"NPT |
| Stopping plugs: | Nickel Plated Brass plugs included |
| Ground/Earth stud: | M5 |
| Terminals: | 0.5 – 2.5mm² (20-14 AWG) |
| Line monitoring: | Blocking diode included EOL can be factory fitted |
| Operating temp: | -40 to +50°C [-40° to +122°F] |
| Storage temp: | -40 to +70°C [-40° to +158°F] |
| Relative humidity: | 95% |
| Weight: | 1.5kg/3.31Ibs |
| Nominal Voltage: | In rush: | Voltage range: | Flash Rate setting: | Nominal operating< current: |
|---|---|---|---|---|
| 24V dc | 1.88A | Regulated 16-33V dc |
1Hz (60fpm) 1.3Hz (80 fpm) 2Hz (120fpm) |
99.5mA 104mA 103mA |
| Part Code: | Identifier: | Description: |
|---|---|---|
| Product type: | D2xB1LD2 | Haz loc LED warning light / beacon |
| Voltage: | DC024 | 24V dc (16-33Vdc |
| Cable entries: [e] | M | 2 × 1/2” NPT 2 x M20x1.5 1 × 3/4” NPT |
| Stopping plug material: [m] | N S |
Nickel plated brass Stainless Steel |
| Guard material & tag: [s] | 0 3 5 |
No lens Guard No lens guard with Equip. Tag No lens guard with Equip. Tag & Duty Label |
| Product version: [v] | H | UL, cUL, ULC, IECEx, ATEX, CSFM – UL1971 |
| Product option: [o] |
1 T X |
Standard product Tropicalisation Custom configuration – contact E2S |
| Enclosure colour: [x] | R | Red |
| Lens colour: [y] | C | Clear |
| Accessories: | ||
| SP65-0001-A4 SP65-0003-A4 |
Pole Mount Bracket Kit 2" St/St A4 (316) Sunshade – St/St A4 (316) |
| Stage 1: [On board] |
Stage 2: [Remote] |
Stage 3: [Remote] |
|---|---|---|
| Steady High Power | Flashing 1Hz † | Triple Strike |
| Steady Low Power | Flashing 1Hz † | Triple Strike |
| Flashing 1Hz † | 2x Flash 2Hz | Triple Strike |
| Flashing 1.5Hz † | Flashing 2Hz † | Double Strike |
| Flashing 2Hz † | Triple Strike | Triple Strike |
| Double Strike | Steady High Power | Triple Strike |
| Triple Strike | Flashing 2Hz † | Double Strike |
| † Setting permitted for use as public mode fire alarm device | ||
.png)
