| STExCP8-BG-I | Version: IS Break Glass Manual Call Point | |
| Switch: | Sealed – IP67 | |
| Ingress protection: | EN/IEC 60529 – IP66/67/68 | |
| Enclosure matl: | 316L Stainless Steel | |
| Colour: | RAL3000 Red (others available on request) | |
| Cable entries: | 2 x M20x1.5 top and 1 x M20x1.5 side. Back box can be rotated to give 2 x bottom and 1 x side entries |
|
| Stopping plugs: | 2 × 316 Stainless Steel plugs as standard Brass and Nickel plated plugs optional |
|
| Terminals: | DIN rail 8 × 2.5mm² SAK2.5 or Termination board featuring 6 × 2.5mm² terminals plus 4 x dedicated EOL & Series terminals |
|
| Earth: | External M5 earth connection | |
| Relative Humidity: | R.H. 95% @ 20°C | |
| Test: | Test key facility | |
| MTBF: | 479.6 years / 4,201,680 hours - MIL 217 | |
| Weight: | 4.2Kg/9.26Ibs | |
| Supply voltage: | 24Vdc Nominal 30Vdc Maximum via barriers | |
| Input safety parameters: |
Ui Ii Pi Ci Li |
30V 500mA 1100mW 0 0 |
Component: |
Value: |
Max current: |
| End-of-Line Resistor | min. 470R / 2W or min. 2k2 / 0.5W |
n/a – limited by barrier |
| 5% Max. tolerance. Min. size: Ø3.5 × 9.0mm 2W or Ø2.6 × 6.8mm 0.5W |
||
| End-of-Line Diode | 2W | 59.13mA – limited by system |
| Type 1N5401. Min. size: Ø4.8 × 7.2mm | ||
| Series Resistor | min. 470R / 2W or min. 2k2 / 0.5W |
n/a – limited by barrier |
| 5% Max. tolerance. Min. size: Ø3.5 × 9.0mm 2W or Ø2.6 × 6.8mm 0.5W |
||
| Series Diode | 2W | 59.13mA – limited by system |
| Type 1N5401. Min. size: Ø4.8 × 7.2mm | ||
| Series Zener Diode Type 1N53xxB Ø3.3 × 8.4mm Min component size |
3V3 4V7 5V1 5V6 6V2 6V8 10V 12V |
230mA – limited by system 162mA – limited by system 149mA – limited by system 136mA – limited by system 122mA – limited by system 112mA – limited by system 76mA – limited by system 63mA – limited by system |
| Spares: | ||
| SP70-0001 SP70-0040 |
Replacement break glass elements (Pack of 50) STxCP8-BG Test Key |
|
| Accessories: | ||
| SP65-0001-A4 SP65-0002-A4 SP70-0065 |
Pole Mount Bracket Kit St/St A4 (316) Sunshade – St/St A4 (316) Break glass hammer with chain |
|
| Version: | Part reference: | Description: |
|---|---|---|
| Product type: | STExCP8BG | IS Break Glass Manual Call Point |
| Switch type: [s] | S D |
SPCO/SPDT DPCO/DPDT |
| Terminals: [t] | D P |
DIN Rail 8 × SAK2.5 PCBA termination: 6 × 2.5mm² plus 4 × EOL & Series terminals NOTE: D option only available if no EOL, series or LED are required P option only available if EOL, series or LED are required to be factor fitted or installed during installation |
| Lift flap: [l] | L N |
Lift flap No lift flap |
| Cable entries:[e] | A B C D E F G |
3 x M20x1.5mm 2 × 1/2" NPT – adaptors 2 × 3/4" NPT – adaptors 2 x M25x1.5mm – adaptors 1 × 1/2" NPT – adaptor 1 × 3/4" NPT – adaptor 1 x M25x1.5mm – adaptor |
| Stopping plug/ adaptor material: [m] |
S | Stainless Steel |
| Duty label/Equipment tag: [d]: | 1 2 3 4 5 6 7 |
No Duty label, no Equip. tag Duty label Stainless Steel Duty label St/St + Equip. tag Duty label Metalised Polyester Duty label M. Poly. + Equip. tag Equip. tag only Special label requirement |
| Product version: [v] |
I | UL, cUL, IECEx, ATEX, DNV |
| Product option: [o] | 1 R W |
Standard product With EOL, series and/or LED devices Alternate EOL wiring |
| Enclosure colour: [x] | R B N Y V S K M Z |
Red Blue Green Yellow Red/White Yellow/Black Black Magenta Red/Black |
| LED indicator: [u] | N L C |
No LED required LED with 1.5K ballast resistor LED without ballast resistor |
| E.O.L.Module: [e] optional |
ExxxR ED1 ExxxZ |
Resistor value in Ohms e.g. E470R = 470 Ohm Diode IN4007 = ED1 Zener diode e.g. E5V1Z = 5.1V |
| Series Module: [s] optional |
SxxxR SD1 SxxxZ |
Resistor value in Ohms e.g. S1K5R = 1.5K Ohm Diode IN4007 = SD1 Zener diode e.g. S5V1Z = 5.1V |
.png)
