The ML25F features IP66 & IP67 (Type 4/4X) enclosures and re-entrant flare horns manufactured from high impact, fire retardant ABS. All models have dual cable entries and large termination areas containing in & out terminals.
Available with 70 and 100V line transformers or in 8 or 16 Ohm low impedance versions.
The 70V line model is UL & cUL approved for Fire Alarm & Emergency and Professional & Commercial use for the US and Canada.
| Datasheet | Datasheet.pdf |
| Installation Manual | ML15-25__D206-00-001-IS-SC_Issue_1_.pdf |
| Installation Manual | ML15-25_Inst__ISN3604-A_.pdf |
| UL certifcate of compliance | UL_CoC_-_20160119-E230764_Vol.3_Sec._1_ML15__ML25.pdf |
| CSFM Listing | 2279-0502__ML_.pdf |
| Russian EAC Declaration of Conformity | D-GB.GA05.B.12595-20-24.03.2025.pdf |
| Russian Maritime register | 19.00193.278.pdf |
| Ingress Protection certificate | M_Range_IP_Rating_Report.pdf |
| Declaration of Conformity | DC-028_Issue_H_M.pdf |
| Polar plots & test report | R2081-ML25-25W.pdf |
| EASE files | ML25_EASE.zip |
| 2D drawing (PDF) | SK0122_Issue_B.pdf |
| 2D drawing (DWG) | SK0122_Issue_B.dwg |
| 3D drawing (IGS) | SK0122-3D_Issue_A.IGS |
| 3D drawing (STEP) | SK0122-3D_Issue_A.STEP |
| Hi-res product image 1 (TIFF) | 2-24-020_ML25.tif |
| Lo-res product image 1 (JPG) | 2-24-020_ML25.jpg |
| SPL: | 111dB +/-3dB @ 1w @ 1m – Pink noise 121dB +/-3dB @ 25w @ 1m |
| Rated power: | 25 Watts RMS |
| 70v line tappings: | 25w / 12.5w / 6w / 2w tappings (z=196 Ohms/392 Ohms/816.67 Ohms/2.45kOhms) |
| 100v line tappings: | 25w / 12.5w / 6w / 2w tappings (z=400 Ohms / 800 Ohms / 1.67kOhms / 5kOhms) |
| Low impedence: | 8 Ohm or 16 Ohm |
| Dispersion: | 130° @ 1kHz & 32° @ 4kHz |
| Frequency range: | 300Hz to 8000 Hz |
| DC Line monitoring: | 2.2uF Capacitor (Transformer version) 470uF Capacitor (Impedance version) |
| Ingress protection: | IP66 & IP67 (Third party tested) UL50E / NEMA250: 4 / 4X / 3R / 13 |
| Housing material: | High impact UL94 V0 & 5VA FR ABS |
| Colour: | Grey (RAL7038) and Red (RAL3000) |
| Cable entries: | 2 x M20; 1 x M20 & 1 × 1/2"NPT; 2 × 1/2"NPT supplied with blanking plug |
| Terminals: | 0.5 to 2.5mm² cables. |
| Operating temp: | -40 to +66°C [-40° to +151°F] |
| Storage temp: | -40 to +70°C [-40° to +158°F] |
| Relative humidity: | 90% at 20°C [68°F] |
| Weight: | 70/100V line: 3.00kg/6.6Ibs Low impedance: 2.50kg/5.5Ibs |
| *SPL data +/-3dB(A). Measured at optimum voltage. | |
| Part Code: | Ident.: | Description: |
|---|---|---|
| Product type: | ML25 | |
| Horn type: | F | Flare Horn |
| Type: | V100 V070 R008 R016 |
100V Line 70V Line 8 Ohm Low impedance 16 Ohm Low impedance |
| Cable entries: | A B C |
M20x1.5 & ½” NPT M20x1.5 & M20x1.5 ½” NPT & ½” NPT |
| Stopping plug material: | N | Nylon |
| Bracket: | 1 2 |
304 (A2) Stainless Steel 316 (A4) Stainless Steel |
| Approvals: | A1 B1 |
CE, EAC, RMRS UL, cUL |
| Enclosure: [x] | G R |
Grey (RAL7038) Red (RAL3000) |
| * *NOTE: | UL & cUL approval only available on 70V line version | |
