New compact high output D2x explosion proof horn sounders and horn/beacon units from E2S

The new D2x family from E2S, the world’s largest independent
warning device manufacturer, is based on a high output 116 dB(A) SPL 64-tone
4-stage horn sounder, which can be combined with a powerful 5 or 10 Joule Xenon
strobe in a compact 130 mm wide, 125 mm deep die-cast marine grade aluminium
housing. Designed for use in Zone 2, 22 and Division 2 hazardous locations, the
D2x is a truly global product range, with multiple approvals permitting use in
regions covered by IECEx, ATEX, NEC and CEC regulations.

With four remotely triggered alarm stages the D2x can signal
multiple safety warnings or process events. In the combined units, the Xenon
strobe beacon and the alarm horn sounder can be activated individually via
separate terminations or linked for simultaneous operation from a common power
supply. The horns offer 64 internationally and nationally recognised alarm
tones plus continuous, intermittent, sweeping and alternating tones with an
effective range of up to 125m (410ft); multi-sounder systems are automatic
synchronised. In combined audible/visible units the polycarbonate beacon lenses
are user-changeable, with a choice of Amber, Blue, Clear, Green, Magenta, Red and
Yellow colours

The corrosion proof, marine grade aluminium die
cast enclosure, available in either red or grey, is phosphated and powder
coated with an ingress protection level of IP66 and NEMA Type 4/4X/3R and 13, ensuring
resilience in the harshest of environments. Dual cable entries and duplicated
cable termination provide the facility to loop in and out; minimising
installation time and cost. For maximum compatibility, the devices can be powered
from 24 or 48 VDC or 115 or 230 VAC.

Download the full press release in different languages;